ELIVED Cord Cover Raceway Kit for Wall, 157in Cable Cover Channel, Cord Wires Hider, 10X L15.7in, White Review (2026)

What this cord cover kit includes

This is a white cable cover raceway kit made up of ten channel pieces, each 15.7 inches long, 0.95 inches wide, and 0.6 inches tall, for a combined 157 inches of coverage. That length is enough to run a cable from a wall-mounted TV down to a media console, or to route power and HDMI cables sideways to a nearby outlet, and the ten-piece format lets a buyer split the total length across a vertical drop and a horizontal run instead of using one continuous channel. Each piece uses an Attach and Snap design, where the base half sticks to the wall and the cover half clicks on and off by hand, so cables can be added or swapped later without prying at adhesive tape or breaking a channel that was cut to a single fixed length.

Installation and mounting

Installation is tool-free: the base of each channel piece has adhesive backing that sticks directly to a painted wall, and the snap-on cover closes over the cables once they are laid in the channel. This makes the kit approachable for a first-time TV wall mount without an electrician or a drill, though adhesive-only mounting depends heavily on a clean, smooth wall surface, and textured or heavily painted walls can weaken the hold over time compared with a channel that also accepts screws. Because the kit ships as ten separate 15.7 inch pieces rather than fewer, longer runs, a straight wall-to-console drop will include several visible seams where pieces meet, which is worth planning for on a highly visible wall behind a mounted TV.

Color, finish, and customization

The channels come in white, a finish that matches white or light-colored walls out of the box and is a common choice for hiding a single TV cable run without extra work. Because the covers are a raceway-style channel rather than a fabric sleeve, they can be cut to length with household scissors or a utility knife to fit corners, outlets, or shorter runs, and the flat channel profile sits low enough against the wall to be easy to paint over once installed, letting the final look blend closer to the wall color if white does not match exactly. That flexibility is useful in rentals or rooms with a non-standard wall color where an exact factory color match is unlikely.

Where the ten-piece format falls short

The main trade-off of this kit compared with rivals built from fewer, longer channel sections is the number of joints on a long straight run. A single vertical drop from a wall-mounted TV to a low console can use two or three of the 15.7 inch pieces end to end, and each junction is a visible seam unless a connector piece bridges it cleanly, so buyers wanting the cleanest possible look on a tall, exposed wall may prefer a kit built from four or five longer sections instead of ten short ones. The adhesive-only mounting is also a consideration on textured plaster or heavily patterned wallpaper, where extra screws or corner clips not obviously included in this kit may be needed to keep the channel from sagging.

Who this kit fits

This kit is a reasonable fit for a single TV and soundbar setup where the cable run is modest, the wall is smooth painted drywall, and the buyer wants a tool-free, paintable finish rather than a fabric sleeve or a full electrician-installed in-wall kit. It is less suited to a dense home theater rack with many cables bundled together, since the channel width of under an inch limits how many wires can be routed through a single piece at once. Anyone planning a long, unbroken run along a feature wall should weigh the visible joints from ten short pieces against kits that offer the same total length in fewer, longer sections.

Frequently asked questions