Amazon Basics Full Motion Articulating TV Wall Mount with Tilt Swivel, Extends 16 inches, VESA 200x200, for 12" to 40" TVs, 40 lbs, Black Review (2026)

Size and weight compatibility

This mount is built for TVs and flat panels from 12 to 40 inches with a maximum weight of 40 pounds, and it supports VESA mounting patterns from 75x75mm up through 200x200mm, covering the hole spacing used by most smaller televisions and monitors in that size range. Buyers should check both the screen's diagonal size and its actual weight and VESA pattern before buying, since some larger but lightweight monitors can still exceed the VESA pattern limit even if under the weight cap, and some smaller but dense TVs can approach the 40-pound ceiling. This size and weight range makes it a fit for secondary TVs, bedroom sets, kitchen displays, or computer monitors rather than a primary living room television.

Articulating arm and movement range

The mount extends out from the wall up to 16 inches, letting a smaller TV swing well away from the wall toward a bed, kitchen island, or desk chair for closer viewing, then fold back flat against the wall when not in use to save space. Tilt adjustment ranges from about 15 degrees downward to 5 degrees upward, which helps reduce glare from overhead lighting or a window, and the mount also swivels up to 180 degrees side to side, letting the screen rotate to face different parts of a room. This combination of extension, tilt, and swivel gives meaningfully more positioning flexibility than a fixed or tilt-only mount, which matters most in rooms where the ideal viewing angle changes depending on where someone is sitting or standing.

Installation and included hardware

The mount comes with mounting hardware, an installation template, and a user manual, and it is designed for installation into wood studs, as well as concrete and brick walls, with a single-stud mounting design rather than requiring two studs spaced to a specific width. That single-stud approach simplifies installation in rooms where stud spacing does not line up conveniently with the mount's frame, though it also means installers should confirm the stud can safely support the combined weight of the mount and TV before finishing. As with any wall mount, finding the stud accurately with a stud finder and using the provided template to mark hole locations is the most important step in the process.

Where this mount is not the right fit

The 40-pound weight limit and VESA 200x200 maximum firmly rule out most 43-inch and larger living room televisions, which typically weigh more and use wider VESA hole patterns than this mount supports, so buyers with a larger main TV need a different, higher-capacity full-motion mount instead. Fully extended, articulating arms in this weight class can also show a bit of bounce or wobble if the TV is touched or bumped often, which is a normal characteristic of lighter-duty full-motion mounts rather than a defect specific to this model, but it is worth knowing before mounting a TV in a high-traffic spot like a hallway or kids' room.

Who should buy this mount

This mount suits anyone mounting a smaller TV or monitor in the 12 to 40 inch range in a bedroom, kitchen, office, or dorm room, especially where the screen needs to swing toward a bed or seating area rather than staying flat against the wall. It is a budget-friendly way to add full-motion flexibility to a secondary screen without paying for a heavy-duty mount built for a much larger television. Anyone mounting a 43-inch or larger living room TV, or a screen approaching or exceeding 40 pounds, should look at a full-motion mount rated for that larger size and weight range instead.

Frequently asked questions