Mount-It! Full Motion Corner TV Wall Mount, Single Stud Install, Swivel, Tilt & 15 Extension for 32-50 TVs, VESA 100x100-400x400, 66 lbs Review (2026)

Solving the corner mounting problem

Mounting a TV in a corner is a common request in smaller rooms, apartments, or awkward layouts where a flat wall placement is not available or would not face the seating area properly, and a standard fixed or tilt-only mount cannot swivel far enough to aim the screen out of a corner toward the room. Mount-It built this bracket specifically around that use case, with a single articulating arm that extends and swivels enough to pull a TV out of a corner angle and turn it to face seating that is not directly opposite. It is designed to work on either a corner or a standard flat wall, so it does not lock buyers into one specific room layout if plans change later.

Motion range and VESA fit

The mount supports VESA patterns from 100x100 up to 400x400mm, a range covering most 32 to 50 inch TVs on the market, and Mount-It rates it for TVs up to 66 pounds. Swivel, tilt, and roughly 15 inches of extension give real flexibility for aiming the screen once mounted, useful in a corner where the ideal viewing angle is rarely straight ahead. A closely related Mount-It corner model lists an extension range of about 3 to 14 inches from the wall, giving a sense of how far this style of arm typically reaches once fully extended, letting the TV come well out from the corner for cleaning or cable access.

Single stud installation

This mount is engineered for single stud installation, meaning it anchors into one wall stud rather than requiring two studs spaced at a specific distance apart, which simplifies installation in corners where finding two evenly spaced studs at the right height is often impractical. Mount-It states the mount works across wood studs, concrete, brick, and metal studs, giving some flexibility depending on the wall construction in a given room. Single stud mounts generally trade a small amount of stability for installation convenience compared to dual stud designs, which is a reasonable trade in a corner application where a dual stud mount often cannot be installed at all due to the angle.

Build and size limits

The bracket is built from heavy-duty steel and carries a 66 pound weight capacity, sized for the 32 to 50 inch TV range Mount-It lists for this model. That places a real ceiling on how large a TV can safely go on this mount, ruling it out for bigger living room centerpiece screens even if the corner placement would otherwise make sense. Buyers should weigh their actual TV against both the size range and weight rating rather than assuming a corner mount automatically fits any TV meant for a corner room, since exceeding either spec risks instability over time, especially with a single stud installation.

Who this mount is right for

This is a sensible pick for anyone with a 32 to 50 inch TV who specifically needs a corner installation and does not want to compromise with a flat-wall mount that cannot properly angle the screen. It is not the right choice for larger theater-centerpiece TVs, or for anyone prioritizing maximum long-term stability under frequent heavy adjustment, where a dual stud mount generally holds up better over years of use. For the specific job of getting a mid-size TV comfortably angled out of a room corner, though, it fills a gap that many standard full motion mounts simply cannot address.

Frequently asked questions