Amazon Basics Full Motion Articulating TV Wall Mount, with Swivel and Tilt, for 26" to 55" TVs and Flat Panels up to 80 Lbs, VESA Compatible, Single Stud, Black Review (2026)
Updated September 14, 2026 · Research-based review
Our verdict
A single stud full motion mount for 26 to 55 inch TVs up to 80 lbs, with 180 degree swivel and a wide 2.6 to 16.3 inch extension range at a low price. The single stud design is easier to install where studs are not evenly spaced, but it allows more sag when fully extended than a dual stud mount.

Amazon Basics' black full motion articulating wall mount for 26" to 55" TVs up to 80 Lbs, single stud and VESA compatible.
Price range: See on Amazon
What we liked
- + Swivel and tilt let you angle the TV toward different seats
- + 80 Lbs rating handles most TVs in the 26" to 55" range
- + Single stud install works when studs are not spaced for wide plates
Trade-offs
- - Single stud design allows more sag than dual stud mounts when extended
- - Not rated for TVs larger than 55", so bigger sets need another mount
What this mount is built for
This is a full motion articulating wall mount from Amazon Basics, rated for TVs from 26 to 55 inches and up to 80 lbs, covering the common range of bedroom and secondary living room TVs rather than the largest main-room displays. It offers swivel and tilt, with a listed swivel range up to 180 degrees and tilt from plus 10 to minus 5 degrees, letting the screen angle toward a couch, a kitchen island or a side viewing position rather than staying fixed straight out from the wall. VESA compatibility spans from 3.9 by 3.9 inches up to 15.7 by 15.7 inches, which covers the VESA patterns used by the large majority of 26 to 55 inch TVs on the market today.
Weight rating, extension and installation type
The mount is rated for TVs up to 80 lbs, and the articulating arm extends from about 2.6 inches near the wall out to 16.3 inches when fully pulled out, giving a meaningful range for pulling the TV away from the wall to angle it or to access cables behind the screen. Unlike dual stud mounts built for larger or heavier TVs, this is a single stud design, meaning it only needs to be anchored into one wall stud rather than finding 2 studs at a specific spacing, which makes it noticeably easier to install in homes where studs fall at irregular distances or where a dual stud plate simply will not align with the framing.
Installing and using the mount
Because it mounts to a single stud, and is also listed as compatible with concrete and brick walls using appropriate anchors, installation is more forgiving than a dual stud design, though the tradeoff is that a single stud mount generally has less resistance to sag or wobble when the arm is fully extended with a heavier TV mounted, compared with a 2 point dual stud mount. In the box, Amazon Basics includes the mounting hardware, a bubble level and a mounting template, which simplifies marking hole locations and keeping the bracket level during installation. Day to day, the swivel and tilt let you adjust the viewing angle for different times of day or different seating positions without needing tools once the initial installation is complete.
How it compares with other full motion mounts in this size range
Against other mounts in the same guide, ECHOGEAR and Mount Factory both offer full motion brackets rated for larger and heavier TVs, up to 82 inches and up to 70 inches respectively, and both use dual stud designs that generally hold steadier at full extension than a single stud mount, which is reflected in their higher scores. This Amazon Basics mount's advantage is a lower price and an easier single stud install for the 26 to 55 inch TV range it targets, which suits buyers with a lighter TV who value installation simplicity over maximum stability at full arm extension.
Who should buy this mount
This mount fits buyers with a TV between 26 and 55 inches and under 80 lbs who want tilt and swivel adjustment on a budget, especially in a room where wall studs are not spaced for a dual arm mount. It is a solid choice for a bedroom, guest room or secondary TV rather than a large main-room display. If your TV is heavier, larger than 55 inches, or you plan to leave the arm extended most of the time, a dual stud mount such as the ECHOGEAR or Mount Factory options rated for larger screens would hold more steadily at full extension.
Frequently asked questions
Does this mount need 2 wall studs or just 1?
It is a single stud design, so it only needs to be anchored into 1 wall stud, which makes it easier to install where studs are not spaced evenly.
What is the maximum TV size and weight this mount supports?
It is rated for TVs from 26 to 55 inches and up to 80 lbs, covering the VESA range from 3.9 by 3.9 inches up to 15.7 by 15.7 inches.
How far can the arm extend from the wall?
The articulating arm extends from about 2.6 inches near the wall out to 16.3 inches when fully pulled out.
What is included in the box?
The mount ships with the mounting hardware, a bubble level and a mounting template to help align and install the bracket.
Prices change often, so check the current price and availability on Amazon.
Check price on AmazonHome Theater Setup Hub may earn a commission from the link above.